In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the home, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it is actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so you get something which looks like a cone. The most important thing here is to be realistic with what type of paper plate that you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak once you place the mask on. Be sure the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint once you’re done, so you don’t wind up with smudges or smears on your dog.

Then it’s time to glue the mask on your dog’s head. First you will need http://www.e-tail.be/best-affordable-dog-food-finding-right-type-cheap-dog-food/ to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Be certain it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged firmly onto the surface of your dog. Don’t make the folds too big or else it could look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Make certain that the ears are flat and make certain it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask because your dog protection, you will need to do some sanding to make certain it’s secure on your dog. You can accomplish it by sanding off any excess paper that may have been eliminated from your mask.